Diagnostics and Configuration

Click Below:

Assist - An adapter configuration and diagnostics tool running under Windows 98, 95a and 95b, DOS, OS/2. Overview and start-up information.

Configuring Drivers - Information specific to each driver. Details of configuration parameters and any other technical notes.

MDGLOG95 - An adapter status reporting utility running under Windows ME, 98, 95a and 95b, and Windows NT 4. Installation, use (running a health check and troubleshooting, and de-installation information.

MVER (DOS) and MVER32 - A file checking utility running under Windows XP, ME and 2000, 98, 95a and 95b, Windows NT4. Outputs information such as the driver name, version number and associated software release, and verifies the checksum. Installation, use and output information.

Protocols - AS400, Client 32, LLC and NetBIOS protocols. Installation information for AS400 with miniport drivers on Windows systems. An overview of Client 32, Novell's NetWare client architecture. Installation, configuration and usage information for LLC and NetBIOS with CMDGODI.LAN on Novell NetWare systems.

PWSET and PWRESCUE - A utility to password-protect adapter configuration, and a utility to reset such passwords, running under DOS,  - Usage and command-line options.

QuickREV - An upgrade tool running under Windows, which upgrades a network setup to with the latest LSS driver software without disruption. Usage information: running, command-line options, scriptfiles, and logging information.

Troubleshooting - Information about Support, miscellaneous troubleshooting information, and troubleshooting information specific to driver installation.

TRTEST - An adapter testing and reporting utility running under  DOS and OS/2, which provides basic details such as I/O address, transfer mode and  ring speed, and also tests the connection between two computers. Usage and command-line option information.

WHATADAP and IFADAP - A DOS utility to report information about a device, such as bus type and bus identifier, and a program that uses this information to program CONFIG.SYS so that device drivers loaded depend upon the adapter type. Usage, command-line options and output information.